Back to Ganoksin | FAQ | Contact

Wiwat Kamolpornwijit - Jewelry Gallery


#1

I hand-form every piece of polymer clay jewelry. All colors are original colors of clay, there is no paint applied. I use several techniques including caning, engraving, weaving, layering, and many others for which I don’t have names. I add beads and wires to complement clay work. Ear wires and wires are sterling silver; necklaces are either sterling silver, 19 strands stainless steel Beadalon, or rubber.

It was a fund raising activity for my temple that got me into polymer clay in 2004. It is a long story with lots of twists and turns. In 2007 I opted to do art/craft full time. I used to worked as an environmental researcher in Oak Ridge, TN for 6 years so you know I glow in the dark!

Polymer is durable when handled properly. It should be kept from pointed or sharp objects that may scratch or cut the surface. It is flexible to a certain degree and is unlikely to break (but not impossible) when dropped. A long period of exposure to alcohol may do some damages to polymer, hence it's better to put the jewelry on after spraying hair products and perfume. I have never done anything special to clean the polymer except rinsing it with water when it starts collecting dust.

Website: Wiwat Kamolpornwijit




#2

Wiwat Kamolpornwijit


#3

Wiwat Kamolpornwijit


#4

Wiwat Kamolpornwijit


#5

Wiwat Kamolpornwijit


#6

Wiwat Kamolpornwijit


#7

Wiwat Kamolpornwijit


#8

Wiwat Kamolpornwijit


#9

Wiwat Kamolpornwijit


#10

Wiwat Kamolpornwijit


#11

Wiwat Kamolpornwijit


#12

Wiwat Kamolpornwijit