Two questions-

Jewelry Discussion
1

Hi Folks,

Does anyone have contact for Glendoe Corp.,
manufacturers of GRS tools?

I know this has been touched on in the past, but what do people
use in their ultrasonics for a liquid?

Thanks,

Dave

Dave Sebaste
Sebaste Studio
Charlotte, NC (USA)
dave@sebaste.com
http://www.sebaste.com

2

Dave-
The WATTS number for GRS/Glendo is 800-835-3519 Overlander Rd,
Emporia, Kansas Regards- Ricky Low

3 
   Does anyone have contact for Glendoe Corp.,
manufacturers of GRS tools?

if no one posts it by tommorrow, i’ll look it up for you (it’s
at the shop)

  I know this has been touched on in the past, but what do
people use in their ultrasonics for a liquid?

#1 choice is oakite bcr (thanks again for the info frank goss).
#2 choice is the purple stuff from swest, liquid.
#3 choice works great in a pinch, regular old mr. clean, 1/2
capfull of ammonnia optional.

best regards,

geo fox

4

Hi Dave,

You can spend a lot of money for cleaners but I have found that
Fantastic or Formula 409(you can buy gallons cheap at Sams Club)
works fine. You can dilute it 50/50 with water and even add a
few drops of ammonia if it is to your liking.

Regards,

Skip

                                  Skip Meister
                                NRA Endowment and
                                   Instructor
                                @Skip_Meister
                                10/10/9701:26:12
5 
Does anyone have contact for Glendoe Corp.,
manufacturers of GRS tools?

Glendo is 1-800-835-3519

6

dave, I use oakite corp. BCR (buffing compound remover) cheaper
than ammonia and mister clean and less fumes. works better also.
Oakite produsts inc 50 valley road berkley heights n.j.
07922-2798 Their home office Frank