Back to Ganoksin | FAQ | Contact

[Tucson 2005] Orchid Exhibitors


#1

Spinel, She has wide range of colors: Red, Ocean Blue and Cinnamon,
White, Coffee, Pink or Sienna Orange.

	"Have you seen her all in gold
	Like a queen in days of old
	She shoots colors all around
	Like a sunset going down
	Have you seen the lady fairer=85..

	Coming colors in the air
	Oh, everywhere
	She comes in colors
	She's like a rainbow
	Coming colors in the air
	Oh, everywhere
	She comes in colors"

			(Jagger/Richards)

Spinels, Sapphires, Peridots and other natural gemstones from Burma.
http://www.gemcal.com

Visit Us at
Tucson 2005 - GJX Gem & Jewelry Show
February 2-7, 2005, 10:00AM - 6:00PM
198 S. Granada Ave. Tucson, AZ.
Booth # 1102

Gemcal
http://www.gemcal.com


#2

46 Jewelry Supply Inc
Kenneth Singh
Karat Rolling Mills & Tanita Scales.

Thought I was not going to Tucson this year. But could not stay away
from all friends & customers.

Its an addiction. Have been going to Tucson for the past 16 years.

See you at the Holidome Palo Verde Gem & Lapidary Wholesalers
Show.

Regards Kenneth Singh
karat46@aol.com


#3

In February and March, Metalwerx is honored to participate in two
nationally recognized events which emphasize education in
metalsmithing and jewelry.

February: Tucson Gem Show

Booth at Catalog in Motion, Tucson Hilton East
Show dates are February 4-7, 2005 (Friday through Monday)
Friday-Sunday, 9am to 6pm, Monday 9am to 4pm

Demonstration:

Live Demonstration by Karen Christians on the Flex Shaft

Learn quick and easy ways of drilling stones and glass, as well as
amazing out-of-the-box techniques. From making a fine silver cable
neck wire to creating a tiny buffing shield out of a plastic soda
bottle, these inventive bench tips for the flex-shaft will fuel your
creativity and take your fabrication skills to the next level. Based
on the forthcoming “Orchid in Print” book from MJSA/AJM Press and
The Ganoksin Project.

AJM’s At the Bench Live: Making the Most of Your Flex-Shaft Thursday,
February 3, 11 a.m. to 12:30 p.m., 3 to 4:30 p.m. AGTA Pavillion

March: MJSA NY Expo

AJM’s At the Bench Live: Making the Most of Your Flex-Shaft Thursday,
February 3, 11 a.m. to 12:30 p.m., 3 to 4:30 p.m. Located at MJSA,
NYC at the Javits Center Sun March 6 to Tue March 8, 2005, Jacob K.
Javits Convention Center New York, NY United States

Karen Christians
M E T A L W E R X
50 Guinan St.
Waltham, MA 02451
Ph. 781/891-3854 Fax 3857
http://www.metalwerx.com/
Jewelry/Metalarts School & Cooperative Studio


#4

Spinel, She has wide range of colors: Red, Ocean Blue and Cinnamon,
White, Coffee, Pink or Sienna Orange.

	"Have you seen her all in gold
	Like a queen in days of old
	She shoots colors all around
	Like a sunset going down
	Have you seen the lady fairer....

	Coming colors in the air
	Oh, everywhere
	She comes in colors
	She's like a rainbow
	Coming colors in the air
	Oh, everywhere
	She comes in colors"

			(Jagger/Richards)

Offering: Red Spinel Singles, Calibrated Red Spinel, Fancy Color
Spinel Singles, Fancy Color Spinel Lots, Spinel Matched Pairs and
Zircon

http://www.gemcal.com

Visit Us at
Tucson 2005 - GJX Gem & Jewelry Show
February 2-7, 2005, 10:00AM - 6:00PM
198 S. Granada Ave. Tucson, AZ.
Booth # 1102

Gemcal
http://www.gemcal.com


#5

All,

At Tucson Gem Mall 2005 I will be introducing a new concave facetted
spiral cut. I call this cut the “Spircle”. It is an amazing cut
and has taken me two years to develop the best set of angles, spatial
separation, and crown facets. You will be amazed at how this cut
works and it is done in jewelry sized stones of 2-5 carats. Supply
is limited as the practice stones have all been sold. See you there
at the Gem Mall booth 111.

Gerry Galarneau
gggemswcr@cox.net


#6

Jerry,

   At Tucson Gem Mall 2005 I will be introducing a new concave
facetted spiral cut.  I call this cut the "Spircle". 

Don’t tease those of us that are not going to Tuson. Show us a
picture!!!

Thanks
Rodney
RC Gems


#7

We will have about 6,000 carats of “Jungle cut” Concave faceted
stones in the Brazilian ‘Millenium’ cut in calibrated Amethyst,
Citrine, and Green Gold Quartz in Ovals, Cushions, Rounds, and
Trilliums. Since they are all “Jungle cut” the prices will be quite
conveniently lower than in other venues at the Tucson Shows.

Also the Concave faceted stones in the Brazilian ‘Millenium’ cut in
Tourmaline, Hiddenite, Green Beryl and Yellow Beryl.

Best regards,
Robert Lowe
Lowe Associates - Brasil
Gemstones, Rough, Specimens
Tucson - February 2 - 7, 2005 - GJX # 205
e-fax: 1-240-757-6022
e-mail: USA < robertplowejr@juno.com >
e-mail: Brasil < @Robert_P_Lowe_Jr1 >


#8

All,

The Gem Mall is just north of the Holidome on Michigan Street. It is
the main parking for the Holidome and now features three tents full
of wholesalers most of which are from Asia. The shuttle bus stops
there as well as the G+LW shuttle between the Holidome and the Gem
Mall. If you are driving, the main entrance is from Randolph or
Country Club both of which are east-west streets that intersect
Michigan Street. The best way is off I-10 at Paloverde North then
turn left (North) just past the Holidome on Michigan Street. Large
signs will direct you to the entrance for the Gem Mall. You will
turn left (west) on either Randolph Way or Country Club Road to get
to the entrance. The parking lot is patrolled, lighted, gated, and
gravel which can get muddy in rains. We are in the main tent booth
#111.

See You There,
Gerry Galarneau
gggemswcr@cox.net


#9

Hi all

I just want to say, that i wish i could be going too, but i cant
this year. However, im not sure if Cornelia (Nellie) and Steve are
going to be there this year. They come from Australia and they deal
in Black Opal from Lighting Ridge. They are personal friends of mine,
and I can assure everyone that they have good quality opal at very
good prizes. They have a shop in Lighting Ridge, they buy straight
from the miners (my brother is one of them) they cut the stones
themselves and are very nice, genuine people. They usually go every
year, so i think they will be there this year too. So if you are in
search of good Lightning Ridge Opal, look for Nellie and Steve

Have a great time everyone.


#10

Hi Folks,

The Gem Mall is just north of the Holidome on Michigan Street.

Sorry, but Gerry got his directions a little mixed! The Gem Mall is
WEST of the Holidome on Michigan St.

Dave


#11

You may visit us for rough in GJX booth #1206 (far left near the
back). We represent the mine owners for a new find of Amethyst /
Citrine (Namibia - SW Africa) This new material rivals the finest
Amethyst in the world with golf ball chunks rich purple / strong red
flash. This will be the first display of material since discovery
last summer.

We represent the mine owners for African Pietersite also. We offer
Pietersite in slabs.

If you have any problem call me. I don’t spend much time at the
booth.

Sincerely,
Ed Cleveland
303-882-8855
http://www.kashmirblue.com


#12

Hello Orchidians
we are going to be in Tucson, are you?
stop by and say hello
we are at the AGTA in the MJSA Pavillion booth 2212

Thomas Cavagnaro, GG
Cadsmithing, LLC A Service Bureau
480 688 4136
cadsmith@cox.net
www.cadsmithing.com


#13

Hi all, I’ll be at Rio’s Catalog in Motion, demonstrating the new
electric saw that Lee Marshall and Phil Poirier have developed for
Bonny Doon. It’s very cool: variable speed controlled with a foot
pedal, easy blade tensioning, a hold-down mechanism so that it
doesn’t chatter and bounce around…and it’s a gorgeous red. Come
by, say hi, and check it out!

Cindy
www.cynthiaeid.com