For those of us planning to be in Tucson during the orgy of shows,
it would be nice to know where those of you selling, or
demonstrating, can be found.
Hanuman asks you send him a message with your specific location to
service@ganoskin.com and he will post it and weekly update this
list. Thanks
Teresa
Dear Hanuman, I will be at the Rio Grande Catalog in Motion
demonstrating CAD Ring making. I have a new company called Advanced
Jewelry Technologies. This process and kit will also be featured in
the 2003 Rio Tool catalog. I would be thrilled to see any and all
from Orchid stop by and say hi. This CAD kit simplifies the whole
ring making and detailing process. The cost on making CAD rings is
more affordable than anytime in the past. I will, (Monday November
18th) finally have demo CD available to send out. Anyone who wants
one can send me an email off line and I will send out a free one. The
new web site is up and mostly operating also. That address is:
www.ajt-online.com. See you at the dinner!
All my best regards,
Todd Hawkinson
T.R. the Teacher
@T_R_Hawkinson_Ltd1
We will be showing at the G&LW (Holidome Palo Verde) Booth 442 to
444 Feb 6th to Feb 14th
Kenneth Singh will be there with Karat Rolling Mills
46 Jewelry Supply,
46 West 46 St,
New York, NY 10036
karat46@aol.com
Jewelry Tools By Miland is reporting in with our location at the
Tucson Gem and Mineral Show:
We are in the same space as last year: Tucson Electric Park in the
big white “Pavilion” tent in space 11. Thank you for all your
efforts on everyones’ behalf.
BEST BEAD SHOW, BOOTH #42
FEBRUARY 5 - 9, 2003
TUCSON, ARIZONA
The show location is the Kino Veterans Memorial Community Center,
2805 East Ajo Way
I’ll be selling my reusable BEADifferentT jewelry findings for
handmade glass beads. Earring, pendant and pin findings in sterling
silver or gold filled.
Hope some of you come by and say hi. Otherwise I’ll see you at the
dinner! 
Thanks
Pam Chott
Song of the Phoenix
Thank you for offering to list our booth locations. Stuller will
have two:
February 5-9
MJSA Pavilion at AGTA
Tucson Convention Center
Booth 2102, Arena
February 5-10
AGTA GemFair Tucson
Tucson Convention Center
Booth 1710, Gem Hall
Steve
Steven D. MacDiarmid
Director of Public Relations and Trade Shows
Stuller, Inc.
Steve Green
Stop by and visit us at the 2003 Tucson gem shows. My wife Marcia,
and I will be at the GJX (Gem and Jewelery Exchange) show booth #
700, February 6th thru 11th… I think. Near the bathrooms.
Rough and Ready Gems
Fine briolettes in over 50 gem materials, ultrasonic drilling and tall
tales. www.briolettes.com
We will be selling Tahitian pearls and designer jewelry at the GLDA
show located at the downtown Radisson (Congress St.). Our booth will
be in the lower lobby right by the garage entrance.
Come by and say hi! JoAnna Kelleher Director of Operations/Designer
Pearl Exotics Trading Company 4397 W. Bethany Home Rd., #1281
Glendale, AZ 85301 Phone: (623) 845-0998 Fax: (623) 845-0917
Website: www.pearlexotics.com
Stuller will be exhibiting at the following booth locations.
January 26-28 JA New York
Jacob K. Javits Convention Center
Booth 1750-52, 1849-53
February 5-9 MJSA Pavilion at AGTA
Tucson Convention Center
Booth 2102, Arena
February 5-10 AGTA GemFair Tucson
Tucson Convention Center
Booth 1710, Gem Hall
Steve
Steven D. MacDiarmid
Director of Public Relations and Trade Shows
Stuller, Inc.
Robert P. Lowe Jr. invites you to visit us in Booth #
205 at the GJX - Gem & Jewelry Exchange, Downtown Tucson February 6 -
February 11, 2003
Lowe Associates - Robert P. Lowe Jr.
Rua do Mirante, 573
13801-100 Mogi Mirim, SP, Brasil
Telephone: 55-19-3862-4217
Telefax: 55-19-3806-4354
Join Stuller in Tucson for the introduction of GemEwizard, an
exciting new way to sell, grade, and market colored gemstones.
Demonstrations will be given from 8:30 AM to 10:00 AM, Thursday
through Sunday, in the Maricopa Room of the Tucson Convention Center.
You can also see GemEwizard at
AGTA GemFair
February 5-10
Booth 1710, Gem Hall
GJX Show
February 6-11
Booth 710 (Menavi International)
Steve
Steven D. MacDiarmid
Director of Public Relations and Trade Shows
Stuller, Inc.
Dear Friends,
Please stop in and see me at Catalog In Motion!
If you have received the new Rio Tool Catalog my CAD CAM RingCAD
System is featured on page 34. I will also (hopefully) demonstrate
the molding kit. I have some rings that look like granulation I am
injecting and would love some comments. I am also donating four mold
kits at the Orchid Dinner so if you like the mold process you might
luck out at the Dinner and get one.
If anyone wants to see some real CAD CAM product I will bring
several samples of finished jewelry with me. We will be doing some
tooling of parts so the demo will be real product not virtual
jewelry.
See everyone at the Dinner.
Best Regards,
Todd Hawkinson
T.R. the Teacher
www.ajt-online.com
www.trhawkinson.com
www.mctc.mnscu.edu/jewelry
Align-Rite would like to unveil our new Elite 6 to you. This mill
was designed for jewelers. We look forward to any feed back from you.
We are showing the Elite 6 for the first time at the Rio Grand
Catalog in motion show at the Gem and mineral show in Tucson 2-6 to
2-10.