Back to Ganoksin | FAQ | Contact

Skiptooth blades


#1

Frank Goss, I would like to try your idea of using skiptooth blades
for cutting Plexiglas templates and patterns. Rio Grande and Indian
Jewelers Supply don’t carry them in their catalogs. Would you please
let me know where you obtain them? I tried e-mailing you
off-line;however, it was returned as undeliverable. Thanks for your
help,best wishes, John Barton


#2

Dear John when you get the answer to where to buy the skip tooth
blades for plastic etc. please leave me the address also… Thanks calgang@aol.com


#3

I’m from Polishers & Jewelers Supply Corp. in Prov., RI and we do
sell Skip-A-Tooth Sawblades. Every other tooth is eliminated and
this provides smooth cutting and non-loading action. Sold by the
dozen in size #1. Item # 49.320 Cost $2.35 dozen This item is
not on our website. http://www.pjsupply.com/sawblade.htm


#4

John; et al Skip tooth saw blades are available from Gesswein. part #
186-9060 Eatern office ph 1-800-243-4466. online at
gessweinco@aol.com . Western office 1-800-232-2311. Canadian office
1-800-263-6106. The pack is a dozen. also check my email address again
John it is @frank_goss1. Frank Goss.


#5

Frank, many thanks for your reply. I erroneously stated that IJS did
not carry them in their catalog,when in fact I found them in their
new catalog after I sent the message. I’m sorry for the inconvenience
I caused,but appreciate so much your graciousness in helping me,best
wishes and thank you again, I repeat isn’t this Orchid great. John
Barton, Images By JJ


#6

John,

I get blades to fit my jig saw from the local plastics supply house.
There are two here in Austin, TX. Regal plastics and A-1 Plastics.

Lester…


#7

Calgan, I had stated erroneously in my first message that Indian
Jewelers Supply didn’t carry them in their catalog,when in fact I
found them in their new catalog after I sent the message.Try them at http://www.ijsinc.com