Rolling mill recommendation request

I am looking to purchase a quality rolling mill. I need a wide flat
rolling mill and a wire one. I am thinking of the UK Durston D4
150mm combo or the 2 Italian Cavalans - a 120 mm flat with reduction
gear and an 80 mm wire mill without reduction. I’ve also seen
pictures of the German Dinkel rolling mills but they are very
expensive. What are folks’ experiences with these?

thanks much
–ed in humid reston, va

I have both the Durston and a Cavilin and have used the Dinkel . All
three are good quality machines. The Dinkel is a very fine piece of
German engineering but I am not sure it is worth the extra money. I
would say you cant go wrong with any of the three.

Jim