Oxidation after stone setting?


After bezel setting a picasso marble stone in sterling, I decided
that I may want to use LOS on the piece. Is this possible? Would a
cotton swab be the way to go or just dip it? Will the stone change


I wouldn’t dip it as the LOS would get behind the stone and may be
difficult to rinse out. I would use the cotton swab and repeatedly
apply the LOS until the desired effect was reached. Polish off the
areas where you don’t want the LOS patina and your done.

Sam Patania, Tucson

I would not put the stone into liver of sulfur. marilyn

G’day: dunno for sure, but marble usually contains some iron, and LOS
could change that to a grey or black.

Cheers for now,
John Burgess; @John_Burgess2 of Mapua, Nelson NZ