Back to Ganoksin | FAQ | Contact

Mokume-gane source?

Hello all…

Woodturner/boxmaker Dale Chase is trying to find a metalsmith
willing to make copper/silver mokume-gane in quantities of
approximately 200 square inches x 18 guage thick. As far as I know,
he needs a layered laminate, but does not need any patterning done.
If you are interested or know of anyone interested in this job,
please do not respond to the list or me, but rather contact Dale
at 530-432-4096 (phone) or 530-432-4094 (fax).

Thanks! Kim