In addition to sponsoring Karen Christians’/Metalwerx demonstration
at the JCK, Rio Grande is sponsoring all MJSA "At the Bench Live"
presentations and the Orchid booth throughout the JCK show.
Attached is the full schedule of At the Bench Live events.
All presentations take place at the Tools Pavilion Demonstration
Area/Booth 62601:
…
Friday, June 4, 2004
…
10:30 to 11:30 a.m.
AJM’s At the Bench Live: Laser Welding Applications by Designers Liz
Brehmer, Product Manager, Rio Grande
11:30 a.m. to 12:30 p.m.
After the Bench
Liz Brehmer answers questions on new technology used by designers.
12:30 to 1:30 p.m.
AJM’s At the Bench Live: Making the Most of Your Flex-Shaft
Karen Christians, Owner, Metalwerx
1:30 to 2:30 p.m.
After the Bench
Karen Christians answers questions about maximizing the flex-shaft’s
efficiency.
2:30 to 3:30 p.m.
AJM’s At the Bench Live: Laser Welding Applications by Designers
3:30 to 4:30 p.m.
After the Bench
Liz Brehmer answers questions on new technology used by designers.
4:30 to 5:30 p.m.
AJM’s At the Bench Live: Making the Most of Your Flex-Shaft
Karen Christians, Owner, Metalwerx
5:30 to 6:00 p.m.
After the Bench
Karen Christians answers questions about maximizing the flex-shaft’s
efficiency.
…
Saturday, June 5, 2004
…
10:30 to 11:30 a.m.
AJM’s At the Bench Live: Princess Cut Setting
Blaine Lewis, President, New Approach School for Jewelers
11:30 a.m. to 12:30 p.m.
After the Bench
Blaine Lewis discusses the nuances of stone setting.
12:30 to 1:30 p.m.
AJM’s At the Safe Bench
Arthur Anton Skuratowicz, Co-owner, Anton Nash LLC
1:30 to 2:30 p.m.
After the Bench
Arthur Anton Skuratowicz answers questions on how to properly assess
your safety needs.
2:30 to 3:30 p.m.
AJM’s At the Bench Live: Princess Cut Setting
Blaine Lewis, President, New Approach School for Jewelers
3:30 to 4:30 p.m.
After the Bench
Blaine Lewis discusses the nuances of stone setting.
4:30 to 5:30 p.m.
AJM’s At the Safe Bench
Arthur Anton Skuratowicz, Co-owner, Anton Nash LLC
5:30 to 6:00 p.m.
After the Bench
Arthur Anton Skuratowicz answers questions on how to properly assess
your safety needs.
…
Sunday, June 6, 2004
…
10:30 to 11:30 a.m.
Platinum Casting Video Presentation
Jurgen Maerz, Technical Director, Platinum Guild International USA
11:30 a.m. to 12:30 p.m.
After the Bench
Jurgen Maerz discusses how platinum casting might grow your bottom
line.
12:30 to 1:30 p.m.
Platinum Casting Video Presentation
Jurgen Maerz, Technical Director, Platinum Guild International USA
1:30 to 2:30 p.m.
After the Bench
Jurgen Maerz discusses how platinum casting might grow your bottom
line.
2:30 to 3:30 p.m.
AJM’s At the Bench Live: Platinum Bench Techniques
Jurgen Maerz, Technical Director, Platinum Guild International USA
3:30 to 4:30 p.m.
After the Bench
Jurgen Maerz discusses how to bring lustrous platinum products to
your customers.
4:30 to 5:30 p.m.
AJM’s At the Bench Live: Platinum Bench Techniques
Jurgen Maerz, Technical Director, Platinum Guild International USA
5:30 to 6:00 p.m.
After the Bench
Jurgen Maerz discusses how to bring lustrous platinum products to
your customers.
…
Monday, June 7, 2004
…
10:30 to 11:30 a.m.
AJM’s At the Bench Live: Flex-Shaft Basics
Michael Dickey, President, Michael Dickey Designs
11:30 a.m. to 12:30 p.m.
After the Bench
Michael Dickey discusses the proper uses and maintenance of
flex-shafts.
12:30 to 1:30 p.m.
AJM’s At the Bench Live: Gluing Techniques
Nicholas Regine, Product Applications Support Specialist, Swarovski
North America Crystal Components Division
After the Bench
1:30 to 2:30 p.m.
Nicholas Regine answers technical questions about adhesive and
gluing applications.
2:30 to 4:30 p.m.
Best Practices for Successful Casting
Alan Bell, Director, Rio Grande
4:30 to 5:30 p.m.
AJM’s At the Bench Live: Gluing Techniques
Nicholas Regine, Product Applications Support Specialist, Swarovski
North America Crystal Components Division
5:30 to 6:00 p.m.
After the Bench
Nicholas Regine answers technical questions about adhesive and
gluing applications.
…
Tuesday, June 8, 2004
…
10:30 to 11:30 a.m.
Live Demo of CAD/CAM for the Production of Wax Models
Tim McKimson, President, Graphitech
11:30 a.m. to 12:30 p.m.
After the Bench
Tim McKimson addresses attendees’ CAD/CAM problems.
1:00 to 2:00 p.m.
Live Demo of CAD/CAM for the Production of Wax Models
Tim McKimson, President, Graphitech
2:00 to 3:00 p.m.
After the Bench
Tim McKimson addresses attendees’ CAD/CAM problems.
Hope to see you there!