Back to Ganoksin | FAQ | Contact

Hollow ring repair. Oh boy!

John Hardy, 18k yellow. Looks like a silicon inside to keep the shape during casting. It is hollow in each section. Repair help needed on this one. It’s been taken in, I do not know whey, but it is ours to repair. Any help would be very appreciated.


I always just handed them back if the girls accidentally took one in but I did repair a couple with my laser

it was good on the edges until i got to the middle area. I used solder too, and flattened it. What settings on the laser?

It’s been years and I used an old laser from B&D. Very manual settings

1 Like