Back to Ganoksin | FAQ | Contact

Hard carving wax


#1

Dear Orchidians! Summer is over, next stop: Christmas!

I am loking for large blocks of hard carving wax (the green kind with
Kerr). The maximum I have been able to get were one pound blocks. I
have half of a block left I was given, and this half is already about
2 pounds… I would be grateful for any cues…

Thanks in advance,
Poidi Trauttmansdorff
@Trauttmansdorff


#2

Aloha Poidi, The company you want to get in contact with is,

Freeman Mfg. & Supply 1246 W. 70th Street Cleveland, Ohio 44102-2097
USA 216-961-4200 800-321-8511 FAX 216-961-9233

They have Block machinable wax to 8" x 24" x 48" (also 8"x30"x96"),
Cylinders 18"(L) x 9"(Dia.). They will also do Bulk and custom blocks
and cylinders on request. They also have Agitated Melting Tanks for
remelting Machinable Wax for reuse. There are some other materials of
interest, so request a catalog.Good Luck with your Modelmaking
venture. Hope this was of help, as always, If I can be of assistance,
please feel free to contact me.

Best Regards,
Christian Grunewald
Precision Modelmaking Technologies
Hawaii
Technical Representative for Model Master
www.modelmaster.com
(808) 622-9005


#3

Attn. Poidi Trauttmansdorff…

I am looking for large blocks of hard carving wax (the green kind
with Kerr). The maximum I have been able to get were one pound
blocks. I have half of a block left I was given, and this half is
already about 2 pounds... I would be grateful for any cues... Thanks
in advance, Poidi Trauttmansdorff trauttmansdorff@freesurf.ch 

Greetings; One of these sites, should aid in your search…

http://www.kerrlab.com/Products/English/Wax/JewelrsWaxKit.htm

http://www.silversmithing.com/market.htm

http://www.tradelock.com/cgi-bin/search_engine?do_what=show_category&c
ategory=55

Do Enjoy–
Dave.
(guldsmedis@home.com)
(for the record, I prefer the ‘blue’)…


#4

Metalifurous on West 46th street in between 5&6th Avenues in New York
will have your wax