Back to Ganoksin | FAQ | Contact

Disk cutter question


#1

Hello–Hoping some Orchid folks can answer this before I do any
potential damage. I need to cut a lot of disks in non- metal. I’m
not sure what materials yet but probably paper, cardboard, vinyl
sheet or felt. Rather than using scissors I’m thinking of using my
disk cutters to make the project go quickly. I know from sewing that
you should never use good fabric shears on paper because it will dull
the blades. Will this dull the edge of the cutters? Thanks for any
advice. Mary


#2

I used mine for paper and leather. It does get grease on the
material.