Back to Ganoksin | FAQ | Contact

Article on making a ring mandrel for the lathe


#1

I just finished making one, and writing up how to make an expanding
ring mandrel/arbor for small lathes. If anyone wants more
clarifications, has suggestions, etc let me know and I’ll add more
info to the article. I hope it is of use to my fellow Orchidians as
I’ve gotten a lot of help from the list in the past (and will in the
future).

"A Universal Expanding Ring Mandrel for the Small Lathe"
http://www.cartertools.com/mandrel1.html

Nick
@Felice_Luftschein_an is Felice Luftschein and Nicholas Carter. Check out our
homepage www.cartertools.com/nfhome.html