[Source] Auminum casting
2013-04-10 02:04:49 UTC
Does anyone have a source for aluminum casting?
2013-04-10 14:47:55 UTC
I know a "lot" of people that cast in aluminium, but as a hobby, not a commercial venture. Some use lost wax, some use sand.
Let me know if you want an introduction.
Regards Charles A.
2013-04-11 02:08:57 UTC
You can also use lost foam, the burnout is caused by the molten metal.
2013-04-12 03:31:30 UTC
You can also use lost foam, the burnout is caused by the molten
But make sure you use the architectural polystyrene (the white stuff, not the blue and red stuff), you get a better finish. CIA
Back to Ganoksin