Back to Ganoksin | FAQ | Contact

Sheet silver quality problems


#1

Hey all!!

I am having a problem with pits from impurities that show up on sheet
silver as I am buffing pieces.

Also, the same silver does not take on a very good polish. The finish
can go from milky to looking like fine microscratches have appeared
on the piece (yes I used new buffing wheels) even with Zam and red
Rogue. The problem is intermittent, one bad batch between several
good batches.

If you are having a problem with your silver, I urge you to contact
your distributor and have them put pressure on Handy to upgrade thier
quality control processes.

Harry