Back to Ganoksin | FAQ | Contact

Searching for "C" shaped material

Perhaps our mentor in NZ will again describe making small draw
plates for custom shapes. I have made several and made several blank
sets for the instructor at school. Super. I used cold rolled steel,
1/2 an inch square and a 1/4-20 bolt on each end. I paid like $4.00
for an 8 foot piece of steel. Gave the school half. You can also look
in Metalwork and Enameling by Herbert Maryon (a super book by the
way) in Chapter XV entitled “Mouldings”.

Bill in Vista