I lost my manual for this… I’ve figured everything out except how
to link programs together.
Each program has three temperature steps. So, in order to do a four
temperature burnout cycle (300F, 700F, 1350F, then casting temp), you
need to “link” programs.
I cannot for the life of me figure out how to do this.
Does anyone out there know?
Thanks,
Darcy you may call me at 620.792.3980 and I will walk you through
the procedure. It would be easier this way. 10 - 5 Robert Benham
Hi Darcy,
First let me say we are an Authorized Ney Repair Center so we can get
a new manual to you. As for linking your programs:
First need to enter both program 1 and 2 in. Then to link them press
program 1, press start, then press program 2, then press enter.
If I can help with anything else please let me know.
Thanks,
Ken Kotoski
MPG Repair