Back to Ganoksin | FAQ | Contact

Gold star stampings needed


#1

Hello fellow Orchid members, I’m looking for a source for 14K yellow
gold stampings in the shape of a star. I really need small ones
about two to three millimeters in size. They can be thin, even 24ga.
would be fine. I could use larger ones as well. Thank you in
advance, Richard Olson, OlsonDesign Jewelers


#2

There are star stampings in the Chain section of my Stuller’s
findings catalog. Sizes run from about 6 mm to 4 cm or so but if you
ask, they may have others.

You might try a paper punch with a star shape for the smallest ones

  • they might just work on 24 or 26g sheet. Fancy paper punches are
    usually available at office supply/stationery stores or craft
    places.

HTH
Pam Chott
www.songofthephoenix.com


#3

If you get a drawplate with star shaped holes, you can saw off as
many stars as you want in any thickness that you need. See
http://shorinternational.com/Drawing.htm

I didn’t check to see how many other suppliers there are …

Bruce