Back to Ganoksin | FAQ | Contact

Gold/Silver smelting


#1

A few months ago someone had their link on to show their setup for
melting gold and silver… They suggesting using a microphone stand
and suggested it could be purchased from Radio Shack . . . for
19.95…

Would like to see the setup again … have just come from RS and
don’t understand how the laddle and/or torch was gripped by the stand
using the screw on mike holder… thanks Jim


#2
    A few months ago someone had their link on to show their setup
for melting gold and silver... They suggesting using a microphone
stand and suggested it could be purchased from Radio Shack . . .
for 19.95.... 

Hi That was me… Here is the address
http://www.racecarjewelry.com/page03.html follow the links on the
bottom of each page till you find what you are looking for.

I don’t use any screws to hold the torch, I ground away some of the
plastic of the microphone holder so that I could snap it into place
and snap it out of the holder when required… Daniel Grandi