Back to Ganoksin | FAQ | Contact

(Fwd) Silver Quality


#1

Forwarded Message FollowsDate: Fri, 1 Nov 1996 12:29:17 -0600 (CST)
From: “D. Luck” dluck@blue.weeg.uiowa.edu
To: Ganoksin Online service@ganoksin.com
Subject: Silver Quality

I have had to return square silver wire that has draw marks running
along the flat sides. My supplier tells me that they received it from
Handy and Harmon in this condition. Because of the type of finishing
I do, this is a serious problem for me.

David Luck


#2

The problem was not the draw marks but was in the silver, the silver when
held up to the light the reflecktion would show gray to dark blemish, then
when you tried to polish, it seemed to pit and take on a dull look where the
blemish was and sometime it pitted real bad. We had to return many sheets as
all gauges were the same. Lloyd