Back to Ganoksin | FAQ | Contact

[Enamel Bits] Enamel as a final coat


#1

Would like some feedback about using clear or transparent enamel as a final
coat.It should be as thick as possible and be crystal clear. Leon


#2
Would like some feedback about using clear or transparent enamel as a final
coat.It should be as thick as possible and be crystal clear.       Leon

Hi Leon,

As a final coat over what, and on what type of surface?

Karen


#3

What is this final coat on? Cloisonne? Anyway, Allcraft sells a soft
flux (as they call it) which fires a little lower and is used for that
purpose, I believe. They sell several different types of clear enamels
(fluxes) and would probably be helpful in finding what you need.