Back to Ganoksin | FAQ | Contact

Choosing between a Rolling Mill and an ultrasonic


#1

Hi Jeff & All, You mention that the most flat surface you have been
able to find on a combination mill is 70mm. However, our combination
C150 has a flat area of 100mm plus 11 grooves. Also, there is the D2
120 or D4 158 but they are more expensive. Please look at
www.durston.com

Yes and of course “Durston” is the best.(although some may say that
I am biased). Let me know if you need more

Sara Durston

Durston Rolling Mills Progress House Hospital Hill Waterside Chesham
Bucks HP5 1PJ England @Durston_Rolling_Mill