message in a blog-all
sheltech
I’m still fighting with the rolling mill project, since I have
another client seriously interested, one that could make some r&d
time worth doing. The latest problem is keeping strips flat as they
go through the mill, which I solved by sandwiching the copper strip
between the texture plate and a flat plate. This forces the mill to
operate with the rollers separated by close to their limit, which
turns out to be bad for my poor Pepe millthat I had to replace the
drive-shaft/ roller…
View article…
http://sheltech.ganoksin.com/blogs/2008/10/18/message-in-a-blog-all/