Back to Ganoksin | FAQ | Contact

[BenchTube] Gold-Inlay Engraving with AirGraver


#1

Now showing at the BenchTube
Gold-Inlay Engraving with AirGraver- Part 1.1

Runtime: 6m 43s

Hand engraving a high art knife with the Lindsay AirGraver: Part 1,
initial outline cutting. The AirGraver™ is an engraving tool that
runs from direct, steady air-flow and utilizes either an air
compressor or CO2 cartridges for portability. The device can be set
up
to operate from the natural pressure of the user’s hand
(PalmControl™) or may be operated using a foot pedal…

Watch Video:
https://www.ganoksin.com/benchtube/video/324


#2

Now showing at the BenchTube

Gold-Inlay Engraving with AirGraver (part 2)
Runtime: 9m 54s

Hand engraving a high art knife with the Lindsay AirGraver: Part 1,
initial outline cutting. The AirGraver™ is an engraving tool that
runs from direct, steady air-flow and utilizes either an air
compressor or CO2 cartridges for portability. The device can be set
up
to operate from the natural pressure of the user’s hand
(PalmControl™) or may be operated using a foot

Watch Video:
https://www.ganoksin.com/benchtube/video/326


#3

Now showing at the BenchTube

Gold-Inlay Engraving with AirGraver- Part 1.3
Runtime: 9m 54s

Hand engraving a high art knife with the Lindsay AirGraver: Part 1,
initial outline cutting. The AirGraver™ is an engraving tool that
runs from direct, steady air-flow and utilizes either an air
compressor or CO2 cartridges for portability. The device can be set
up to operate from the natural pressure of the users hand
(PalmControl™) or may be operated using a foot pedal.

Watch Video:


#4

Now showing at the BenchTube

Gold-Inlay Engraving with AirGraver- Part 1.5
Runtime: 9m 52s

Hi Everyone! I invite you to watch this video. There are 7 parts to
the whole project. Approx. 11 hours worth of footage!!! There is a
problem with the default viewing of the videos. To unsqish it, click
the fit to window button on the player. Hand engraving a high art
knife with the Lindsay AirGraver: Part 1, initial outline cutting.
The AirGraver is an engraving tool that runs from direct, steady
air-flow and utilizes either an air compressor or CO2 cartridges for
portability. The device can be set up to operate from the natural
pressure of the user’s hand (PalmControl) or may be operated using a
foot pedal…

Watch Video: