Back to Ganoksin | FAQ | Contact

[BenchTube] Examining graver results


#1

Now showing at the BenchTube

Examining Graver results
Runtime: 2m 13s

Once the Onglette graver is secured in the wooden handle, I will get
the ‘feel’ of the new blade. I must make sure all of the honed sides
are equal on both side of the blade…If this passes my visual
inspection, then the graver is ready for the paper finishing. Once
that is done…it’s now able to be used to what it was made
for…“Bright-Cutting”

Watch Video: