3D scanner & stone source

Jewelry Discussion
1

Dear All,

Two things…

First, does any have a good source for 3 & 4mm genuine cabs? I need
various colors without a large cost. My son and I are making some
small pendants and I would like to have him sell these for maybe
$7.00 or so. Just to get him to see if he likes to do any of this.

Second I have the Roland 3D probe scanner on Ebay. If anyone is
interested in it, do the search for 3D Scanner and it should pop up.
It really is just like new. I bought a laser scanner so I don’t need
the other.

Thanks & best regards,
Todd Hawkinson

2

Todd, I recommend that you look into The Joseph P. Stachura Co., Inc.
They have 3&4mm garnets at 10 and 20 cents each, and some other
stones from 30 cents to a dollar. Price breaks for lots of 12 and
144. Sometimes there is one in the 12 that has a scratch on the top,
but at those prices, it doesn’t matter very much.

http://www.ganoksin.com/resources/detail-joseph_stachura-1596.html

just a satisfied customer…
M’lou Brubaker, Jeweler
Goodland, MN