Back to Ganoksin | FAQ | Contact

Jewelry Discussion


Topic Replies Activity
About the Jewelry Discussion category 15 September 3, 2019
Hows everyone doing? 29 April 7, 2020
Eleminating ash residue when casting 3 April 7, 2020
3m still dedeco? 3 April 7, 2020
Possibly a repost? Age hardening copper 10 April 6, 2020
Tumblers...vibratory versus magnetic 8 April 6, 2020
Compelling Torch Reasons 19 April 6, 2020
New 20 ton hydraulic press 26 April 6, 2020
Gy-Roc Vibrahone by Tagit 7 April 5, 2020
Working with 14 K Gold 17 April 3, 2020
14k Yellow Gold % for casting? 2 April 3, 2020
To cut or not to cut brass pattern plates for use in the rolling mill 3 April 3, 2020
This is something I don't recognize 13 April 2, 2020
FOR SALE: Casting Machine 2 April 2, 2020
Recommended silver supplier 6 April 2, 2020
Bezels and a patterned sheet 28 April 1, 2020
White haze and spots on sterling after ultrasonic 11 March 31, 2020
Hi Heat Gas/Air Torch 3 March 31, 2020
Novorit - Color Applications 1 March 30, 2020
Pressure booster and Natural gas 15 March 30, 2020
Best flux for fine silver and enamelling grade solder? 4 March 30, 2020
Springs for Cufflinks 9 March 30, 2020
Bezel setting uneven stones 10 March 29, 2020
Frosted surface after annealing 6 March 27, 2020
Resize rhodium plated silver ring with accent stones 13 March 26, 2020
Refraction liquids 5 March 24, 2020
Soldering & Glass 12 February 27, 2010
Blisters in an ingot 7 March 24, 2020
Reducing size of rectangle wire 5 March 24, 2020
Stay-At-Home Order 3 March 24, 2020